OEM Inset Manhole Cover Comparison: Materials, Sizes and Coating Choices
Our OEM inset manhole cover range and custom inset drain cover range address different buying briefs. This comparison puts their shared material choices, custom size limits and coating options side by side, so you can decide whether a defined cover model or a broader urban drainage design is the better starting point for your drawings, site dimensions and municipal requirements.
Inset Manhole Cover & Inset Manhole Lid for Drain
Inset Drain Cover and Frame for Urban Infrastructure
Start with the specification you already have
An OEM inset manhole cover suits a project that starts with a defined cover model, clear opening and load class. Our inset drain cover and frame range suits an urban drainage project that begins with a custom dimensional brief and a coordinated cover-and-frame design. Both ranges use ductile iron grades and support coating choices, so the practical decision is how much of the finished specification is already fixed.
We supply the OEM inset manhole cover and lid range with model-level specifications such as clear opening, weight, load class and coating. Our inset drain cover and frame range starts from custom dimensions from 100 mm to 1,200 mm and can be developed around a drawing, sample or performance requirement.
Material grades: overlapping choices, different model coverage
The inset manhole cover range includes ductile iron GGG50 and GGG40. GGG50 is used for the LWI-600 and LWI-800 models, while GGG40 is used for the LWI-R600 recessed model. The custom version accepts GGG50 or GGG40 according to the client specification.
The inset drain cover and frame range uses GGG50 and GGG60 for custom inset manhole cover solutions. GGG50 is therefore a shared material option across both ranges. The grade set differs at the second listed choice: the manhole cover range identifies GGG40, while the drain cover range identifies GGG60.
A replacement order can start with the material and model pairing of the existing LWI product. A new drainage assembly should include the required grade with the drawing, sample or performance requirement so we can align the cover and frame design.
Custom size: model openings or a wider dimensional brief
The defined manhole cover models use 600 × 600 mm and 800 × 800 mm clear openings. The LWI-CUSTOM option supports any size up to 1,200 × 1,200 mm. Measure the existing clear opening and frame profile before matching a replacement to one of these model options.
The inset drain cover and frame range supports custom dimensions from 100 mm to 1,200 mm. Its brief reaches smaller dimensions and is structured around a coordinated urban infrastructure assembly. The two ranges overlap at common project sizes, including 600 mm, 800 mm and dimensions up to 1,200 mm, but they present the sizing decision differently.
For a new drainage layout, send the required opening and outside dimensions together with the frame arrangement. That gives us the information needed to develop the custom cover and frame as one assembly.
Coating options: model combinations or a stated finish brief
The manhole cover range pairs coatings with specific models. LWI-600 uses bitumen plus epoxy, LWI-800 uses hot-dip galvanized coating, and LWI-R600 uses zinc-rich plus polyurethane. The custom model accepts a client-specified coating.
The inset drain cover and frame range identifies hot-dip galvanized, epoxy and bitumen as coating options and supports customized coating thickness. For this range, the finish and thickness can be written into the custom assembly brief alongside the dimensions and material grade.
The manhole cover range gives you ready model-to-coating combinations. The drain cover and frame range gives you room to state the coating and thickness as part of a custom assembly. Include the required coating, thickness and surface expectation in your inquiry instead of naming only the cover size.
Which option fits the purchasing brief?
Choose the inset manhole cover range when your order centers on a known model, a defined clear opening or a replacement frame interface. LWI-600 provides a 600 × 600 mm clear opening and weighs 58 kg, with a C250 load class and bitumen plus epoxy coating. LWI-800 provides an 800 × 800 mm clear opening and weighs 92 kg, with a D400 load class and hot-dip galvanized coating. LWI-R600 provides a 600 × 600 mm clear opening and weighs 64 kg, with a D400 load class and zinc-rich plus polyurethane coating.
Choose the inset drain cover and frame range when the project needs a custom cover-and-frame solution across a 100 mm to 1,200 mm dimensional brief. It suits procurement teams that want to begin with a drawing, sample or performance requirement and then specify material, coating, dimensions and frame details together.
Picture a replacement project first: measure the clear opening and frame interface before selecting an LWI model. For a municipal drainage project, prepare the complete dimensional and finish brief before asking us to develop the assembly. The information you send should match the option you want us to build.
Send the specification in the format you need built
Use the OEM inset manhole cover range for a defined model or replacement interface, and use the custom inset drain cover and frame range for a broader urban drainage design. Send the clear opening, frame dimensions, material grade, coating choice, coating thickness and required quantity for a quote.
The company
Hebei Lanwei Imp.& Exp. Co.,Ltd.
As a trusted global partner in the cast iron manhole cover industry, LANWEI specializes in providing customized manhole cover solutions characterized by high strength, exceptional durability, and stringent safety standards. With over a two decades of industry expertise, we have become a key supplier to municipal, transportation, construction, and other sectors worldwide, backed by advanced production technology, rigorous quality control systems, and flexible service models.…
About Us ↗Visit company website ↗


